Press &DOO )UZG %XV\1$QV, enter
Introduction
Automatic Busy Redial
Busy
Pick up a ringing
Press 'LUHFWHG 3LFNXS ...or press a
No Answer
the primary or phantom directory
priority call, a
directory number + . Then press
Activate
After dialing a busy outside phone
number to forward to; then press
page, or ringing
.
number, press $XWR %XV\ 5HGLDO ...or
&DOO )UZG %XV\1$QV
door phone
&QI7UQ + , then hang up. Your
...or press the primary or phantom
phone tries to call that number every
Pick up an external
Press 'LUHFWHG 3LFNXS ...or press a
directory button to forward + +
30 or 60 seconds, then signals you
page
directory number + . Then press .
NNN + 6SHHG 'LDO + XX + 5HGLDO + 6SNU
This quick reference guide applies to DKT 2000-series
when the called number is available.
...or + NNN + + XX + 5HGLDO +
Pick up any ringing
Press 'LUHFWHG 3LFNXS ...or press a
digital telephones connected to Strata DK14, DK16, DK16e,
Deactivate
Press $XWR %XV\ 5HGLDO
6SNU
...or press
outside line
directory number + . Then press .
DK40, DK40i, DK280, DK424 or DK424i systems. Your
your primary directory number + .
Cancel
Press the same Call Forward button or
telephone may not have all of the buttons/features
Pick up any ringing
Press 'LUHFWHG 3LFNXS ...or press a
button sequence that you used to set
outside line on
mentioned in this guide.
Automatic Callback
directory number + . Then press
Call Forward ...or press a directory
hold
~. (See your System
Activate
1. After dialing a busy or Do Not
number button + and hang up.
See your Telephone System Administrator for more
Administrator for the maximum number
Disturb station, or busy trunk
information on buttons and variable entries with checkmark
NNN = extension to where you want calls forwarded.
of CO lines for your system.)
group, press $XWR &DOOEDFN or .
boxes. He/she will show you which features you have and
XX = 08~60 seconds the phone rings before it forwards (optional).
Call Transfer with Camp-on
should mark the boxes appropriately.
2. Hang up. The system calls you and
Call Park Orbits
rings the station or trunk group
Transfer a Call
1. While on a call, press &QI7UQ.
If you hear a dial tone when you lift the handset, you do not
when it is available.
Park a Call
1. While on a CO line call or internal
2. Dial the directory number you wish
need to press any available directory, number or line button
call, press 3DUN LQ 2UELW...or
to transfer to.
Deactivate
Press $XWR &DOOEDFN ...or press your
before dialing an inside or outside number.
&QI7UQ + .
directory number + .
3. Announce the call, then hang up.
2. Enter an orbit number ~ or
If the station is busy, "camp on" by
Call Forward
Access Outside Line and Call
a valid directory number. If you
hanging up. When the called
have an LCD telephone, enter ,
All Calls
Press &DOO )UZG $OO &DOOV, enter the
number is available, the "camped
1. Dial your access code:
an available orbit is selected.
on" party is connected. If the called
r
number to forward calls to, then press

r Assigned code_________
3. Hang up.
party does not answer after a certain
r
&DOO )UZG $OO &DOOV again
/LQH button
r 3RROHG /LQH *US button.
time, the call rings back to you.
...or press the primary or phantom
Retrieve a Parked
1. Press 3DUN LQ 2UELW ...or from any
2. Dial a phone number.
directory button to forward, then press
Call
directory number press .
Conference Calls
+ NNN + 6SNU.
Account Code Calls
2. Enter the orbit number or extension
Conference
1. While on a call, press &QI7UQ.
Busy
Press &DOO )UZG %XV\
where the call is to be parked.
, enter the
inside/outside call
2. Dial a directory number or outside
Forced Account
1. Access an outside line.
number to forward calls to, then press
to a directory
line.
Code
Park a Call and
1. While on inside or outside call,
2. Enter the Forced Account Code.
&DOO )UZG %XV\
number
again
Page
press 3DUN DQG 3DJH
3. Press &QI7UQ after the called party
3. Listen for dial tone. Busy tone
...or press the primary or phantom
...or &QI7UQ + .
answers. All parties are
indicates an invalid code. Least
directory button to forward, then press
2. Enter the orbit number (~)
conferenced together.
Cost Routing (LCR) dialing: you
+ NNN + 6SNU.
or extension where the call is to be
If you added an outside line to the
will not hear a dial tone.
parked. If you have an LCD phone,
call, press &QI7UQ again before
4. Dial a phone number.
No Answer
Press &DOO )UZG 1R $QVZHU, enter
enter and the system selects
hanging up to allow the outside
the number to forward calls to; press
an available orbit.
parties to continue talking. (If you
Voluntary Account
1. While connected to an outside line
&DOO )UZG 1R $QVZHU again...or
do not, the call is disconnected).
Code
press $FFRXQW &RGH, or dial a
3. Enter the Paging Access Code,
press 6SHHG 'LDO + XX + &DOO )UZG
Some outside lines do not
code:
announce the call and its location.
r
1R $QVZHU
Hang up.
disconnect when conferenced
&QI7UQ +
r
...or press the primary or phantom
parties hang up. If so, press the
6SHHG 'LDO +
Call Pickup
r
directory button to forward +
flashing button to monitor the
6SHHG 'LDO +
r
+ NNN +6SHHG 'LDO + XX +
Pick up ringing
From any directory number, press
conference. If the parties are still
+
r
5HGLDO + 6SNU
call / call on hold
+ the directory number that has
on the line, press &QI7UQ + 6SNU,
+
then hang up. Press 6SNU to
...or + NNN +
at another
the ringing or on-hold call (not
2.
+ XX + + 6SNU.
Dial the Account Code.
disconnect the lines.
directory number
available on all systems.)

Do Not Disturb
Internal Call
Redial
Activate
Press 'R 1RW 'LVWXUE (LED On).
1. Lift the handset or press the directory number button,
Redial last
1. Lift the handset, then press an
then dial a directory number.
number dialed
available directory number or line.
Deactivate
Press 'R 1RW 'LVWXUE again (LED Off).
2. Make a voice announcement after you hear a single
2. Press 5HGLDO.
Hold
tone or when the called party answers.
Save a number to
After dialing a telephone number
Place call on Hold
Press the +ROG button.
Message Waiting
Redial later
(before disconnecting), press 6DYH
Retrieve held call
Press the flashing line button or
/DVW 1XPEHU.
Light Message
After reaching a busy or unanswered
directory number button.
Waiting LED at
station, press 0VJ or to light the 0VJ
Redial a saved
Access an outside line or press a
Place call on
While on a call, press +ROG twice. (No
another station
button.
number
primary or phantom directory number,
Exclusive Hold
one can accidentally pick up your call.)
then press 6DYH /DVW 1XPEHU.
Answer a
Press 0VJ, lift the handset. If the
Handsfree Answerback/Monitoring
Message Waiting
message sender does not answer,
Soft Keys
at your station
hang up and repeat this step to skip to
Receive a
You hear a single warning tone
LCD phone only. When active, the 0RGH, 3DJH, and 6FUROO
the next message.
Handsfree
followed by the caller's voice. Without
keys perform different actions as described by the LCD
Answerback call
lifting the handset, speak toward the
Cancel your
Press a directory number button +
readout directly above the keys. See the Strata DK Digital
telephone at a normal voice level.
station's Message
.
Telephone User Guide for more details.
Waiting light
Use Handsfree
1. While off-hook, on a call, hold down
Soft Keys On
Press 0RGH + (when phone is idle).
Monitoring
6SNU and place the handset on-hook.
Override/OCA
Soft Keys Off
Press 0RGH + (when phone is idle).
2. Release 6SNU.
Busy Override or
Press after dialing the busy station.
Speed Dial
3. Lift the handset to resume the
Off-hook Call
Or press or if the called
conversation.
Announcement
telephone allows Off-hook Call
Store a Speed
1. Do not lift the handset.
Dial number
2. Press 5HGLDO.
Frequently Used Numbers
(OCA)
Announce.
3. Press any button labeled 6', then
Number
Name
Busy Override or
Press after reaching a busy station.
enter the phone number you wish
OCA (barge in)
to store; press 5HGLDO
Paging
...or
press 6SHHG 'LDO (or
Make Page
1. Lift the handset and press a
), then enter
a personal or System Speed Dial
Announcement
directory number.
code (below). Then enter the
2. Enter a page zone code (below):
phone number you wish to store;
All Call Page

press 5HGLDO.
group
Speed Dial Codes
Personal:
ra
r a
Station groups
~
System:
All Call Page group

r a
r a
726+,%$
and external page
r a
© Copyright 2000
zones
Make a call with
Lift the handset and press the 6'
Toshiba America Information Systems, Inc.
Telecommunication Systems Division
External Page
a ...or a
Speed Dial
button
9740 Irvine Blvd., Irvine, CA 92618-1697

zones
Zone(s) depend on system size - see
...or
DKA-QR-DKTEL-VD
lift the handset and press 6SHHG 'LDO,
4010356
your System Administrator.
then enter the Speed Dial code.
Version D.1, June 2000
\
Version D, May 2000
Version C, May 1999
Version B, December 1998 http://telecom.toshiba.com
11" x 17" paper is required for printing

Document Outline